AN 307: Intel® FPGA Design Flow for Xilinx* Users

ダウンロード PDF
ID 683562
日付 3/20/2018
Public
ドキュメント目次
ドキュメント目次 x
1. Introduction to Intel® FPGA Design Flow for Xilinx* Users 2. Technology Comparison 3. FPGA Tools Comparison 4. Xilinx* to Intel® FPGA Design Conversion 5. Conclusion 6. Document Revision History for Intel® FPGA Design Flow for Xilinx* Users
2. Technology Comparison x
2.1. Intel® FPGAs 2.2. Xilinx* FPGAs 2.3. Comparison Table 2.4. Intel® FPGA Device Features
3. FPGA Tools Comparison x
3.1. Hardware and Software Tools for FPGA Design 3.2. FPGA Design Flow Using Command Line Scripting 3.3. FPGA Design Flow Using Tools with GUIs 3.4. Additional インテル® Quartus® Primeプロ・エディション Features
3.2. FPGA Design Flow Using Command Line Scripting x
3.2.1. Command-Line Executable Equivalents 3.2.2. Programming and Configuration File Support in the インテル® Quartus® Primeプロ・エディション Software
3.2.1. Command-Line Executable Equivalents x
3.2.1.1. synth_design 3.2.1.2. place_design/route_design 3.2.1.3. report_timing 3.2.1.4. write_bitstream 3.2.1.5. write_sdf/write_verilog/write_vhdl 3.2.1.6. report_power 3.2.1.7. write_checkpoint 3.2.1.8. Run Complete Design Flow
3.3. FPGA Design Flow Using Tools with GUIs x
3.3.1. Project Creation 3.3.2. Design Entry 3.3.3. IP Status 3.3.4. Design Constraints 3.3.5. Synthesis 3.3.6. Design Implementation 3.3.7. Finalize Pinout 3.3.8. Viewing and Editing Design Placement 3.3.9. Static Timing Analysis 3.3.10. Generation of Device Programming Files 3.3.11. Power Analysis 3.3.12. Simulation 3.3.13. Hardware Verification 3.3.14. View Netlist 3.3.15. Design Optimization 3.3.16. Techniques to Improve Productivity 3.3.17. Cross-Probing in the インテル® Quartus® Primeプロ・エディション Software
3.3.2. Design Entry x
3.3.2.1. HDL Editor 3.3.2.2. Schematic/Block Editor 3.3.2.3. State Machine Editor 3.3.2.4. IP Catalog and Parameter Editor 3.3.2.5. プラットフォーム・デザイナー System Integration Tool 3.3.2.6. Platform Designer Component Editor
3.3.4. Design Constraints x
3.3.4.1. Assignment Editor 3.3.4.2. Create Timing Constraints with the タイミング・アナライザー GUI 3.3.4.3. Create Timing Constraints with the タイミング・アナライザー Text Editor
3.3.7. Finalize Pinout x
3.3.7.1. Pin Planner 3.3.7.2. インターフェイス・プランナー
3.3.12. Simulation x
3.3.12.1. Simulation Models for Designs Containing LPMs or IP Cores
3.3.13. Hardware Verification x
3.3.13.1. System Console 3.3.13.2. Signal Tap Logic Analyzer 3.3.13.3. In-System Sources and Probes 3.3.13.4. Transceiver Toolkit 3.3.13.5. EMIF Debug Toolkit 3.3.13.6. リモートデバッグ 3.3.13.7. その他の Intel® FPGAデバッグツール
3.3.14. View Netlist x
3.3.14.1. RTL Viewer 3.3.14.2. Technology Map Viewer
3.3.15. Design Optimization x
3.3.15.1. Hyper-Aware Design Flow 3.3.15.2. Physical Synthesis Optimization
3.3.16. Techniques to Improve Productivity x
3.3.16.1. Rapid Recompile 3.3.16.2. Block-Based Design Flow 3.3.16.3. Design Space Explorer II
3.4. Additional インテル® Quartus® Primeプロ・エディション Features x
3.4.1. Scripting with Tcl in the インテル® Quartus® Primeプロ・エディション Software
3.4.1. Scripting with Tcl in the インテル® Quartus® Primeプロ・エディション Software x
3.4.1.1. Running Scripts from the DOS or UNIX Prompt 3.4.1.2. Running Scripts in Batch Mode from a Shell 3.4.1.3. Running Tcl Commands Directly from the Command Line 3.4.1.4. Running Tcl Commands Interactively from the Shell 3.4.1.5. The インテル® Quartus® Prime Tcl Console Window
4. Xilinx* to Intel® FPGA Design Conversion x
4.1. Replacing Xilinx* Primitives 4.2. Converting IP Cores 4.3. Setting Equivalent Xilinx* Design Constraints 4.4. Setting Up the Simulation Environment
4.1. Replacing Xilinx* Primitives x
4.1.1. Converting I/O Buffers 4.1.2. Changing Default I/O Standard for Pins
4.1.1. Converting I/O Buffers x
4.1.1.1. Example of Converting I/O Buffer
4.2. Converting IP Cores x
4.2.1. Converting Memory Blocks 4.2.2. Converting Mixed-Mode Clock Manager (MMCM) to Phase-Locked Loop (PLL) 4.2.3. Converting Multipliers
4.2.1. Converting Memory Blocks x
4.2.1.1. Embedded Memory Blocks 4.2.1.2. Differences Between Xilinx* Memory and Intel® FPGA Memory 4.2.1.3. Determining Memory Block and Mapping Ports 4.2.1.4. Memory Port Mapping 4.2.1.5. Example: Converting Simple Dual-Port RAM
4.2.1.2. Differences Between Xilinx* Memory and Intel® FPGA Memory x
4.2.1.2.1. Memory Mode 4.2.1.2.2. Clocking Mode 4.2.1.2.3. Write and Read Operation Triggering 4.2.1.2.4. Read-During-Write Operation at the Same Address 4.2.1.2.5. Error Correction Code (ECC) 4.2.1.2.6. Byte Enable 4.2.1.2.7. Address Clock Enable 4.2.1.2.8. Parity Bit Support 4.2.1.2.9. Memory Initialization 4.2.1.2.10. Output Synchronous Set/Reset
4.2.2. Converting Mixed-Mode Clock Manager (MMCM) to Phase-Locked Loop (PLL) x
4.2.2.1. Feature Comparison 4.2.2.2. Port Mapping Reference 4.2.2.3. Example: Converting Xilinx* MMCM into an Intel® PLL
4.2.3. Converting Multipliers x
4.2.3.1. Feature Comparison 4.2.3.2. Port Mapping 4.2.3.3. Example: Converting to the LPM_MULT IP Core 4.2.3.4. Example: Converting to the Intel® FPGA Multiply Adder IP core
4.3. Setting Equivalent Xilinx* Design Constraints x
4.3.1. Device Constraints 4.3.2. Placement Constraints 4.3.3. Timing Constraints 4.3.4. Retimer Constraints
4.3.1. Device Constraints x
4.3.1.1. DRIVE 4.3.1.2. SLEW 4.3.1.3. IOB 4.3.1.4. IOSTANDARD 4.3.1.5. KEEP
4.3.2. Placement Constraints x
4.3.2.1. PBLOCK 4.3.2.2. PACKAGE_PIN 4.3.2.3. LOC & BEL 4.3.2.4. PROHIBIT
4.3.2.1. PBLOCK x
4.3.2.1.1. Differences Between PBLOCK and Logic Lock Regions
4.3.3. Timing Constraints x
4.3.3.1. set_clock_groups
4.4. Setting Up the Simulation Environment x
4.4.1. Simulation Levels 4.4.2. HDL Support for EDA Simulators 4.4.3. Value Change Dump (VCD) Support 4.4.4. Simulating Intel FPGA IP Cores
1. Introduction to Intel® FPGA Design Flow for Xilinx* Users
2. Technology Comparison
3. FPGA Tools Comparison
4. Xilinx* to Intel® FPGA Design Conversion
5. Conclusion
6. Document Revision History for Intel® FPGA Design Flow for Xilinx* Users

4.3.3. Timing Constraints

You can convert constraints defined in XDC files to SDC commands that the インテル® Quartus® Primeプロ・エディション タイミング・アナライザー can use.

The following table summarizes the most common Vivado* XDC timing constraints and the equivalent SDC timing constraints. You can set the constraints by either modifying the .sdc file or by using the タイミング・アナライザー GUI.

表 58.   Vivado* XDC versus SDC Timing Constraints
Vivado* XDC Timing Constraint タイミング・アナライザー SDC Command Description
create_clock

create_generated_clock

set_max_delay

set_false_path

Defines all the clocks and their relationship in a design.
NA derive_pll_clocks Automatically creates a generated clock constraint on each output of the PLLs in a design.
注: Only インテル® Arria® 10 devices support this command
NA derive_clock_uncertainty Calculates clock-to-clock uncertainties within the FPGA due to characteristics like PLL jitter, clock tree jitter, etc. The タイミング・アナライザー generates a warning if the command is not present in the SDC files
set_input_delay Input timing constraint that you use to define the Pad-to-Setup timing requirement in a design.
set_output_delay Defines the global Clock to Pad timing requirement in a design.
set_max_delay Combinational path that constrains all combinational pin to pin paths.
set_false_path Eliminates the paths from timing consideration during Place and Route and timing analysis.
set_clock_groups w/- include_generated_clocks set_clock_groups Cuts timing between clocks in different groups.
NA derive_pll_clocks Vivado* tools auto-derive the generated clocks; therefore, XDC files do not require these constraints.
NA derive_clock_uncertainty

For more information about using the SDC commands and their usage, refer to the タイミング・アナライザー User Guide: インテル® Quartus® Primeプロ・エディション .

関連情報
レベル 2 の表題