AN 307: Intel® FPGA Design Flow for Xilinx* Users

ダウンロード PDF
ID 683562
日付 3/20/2018
Public
ドキュメント目次
ドキュメント目次 x
1. Introduction to Intel® FPGA Design Flow for Xilinx* Users 2. Technology Comparison 3. FPGA Tools Comparison 4. Xilinx* to Intel® FPGA Design Conversion 5. Conclusion 6. Document Revision History for Intel® FPGA Design Flow for Xilinx* Users
2. Technology Comparison x
2.1. Intel® FPGAs 2.2. Xilinx* FPGAs 2.3. Comparison Table 2.4. Intel® FPGA Device Features
3. FPGA Tools Comparison x
3.1. Hardware and Software Tools for FPGA Design 3.2. FPGA Design Flow Using Command Line Scripting 3.3. FPGA Design Flow Using Tools with GUIs 3.4. Additional インテル® Quartus® Primeプロ・エディション Features
3.2. FPGA Design Flow Using Command Line Scripting x
3.2.1. Command-Line Executable Equivalents 3.2.2. Programming and Configuration File Support in the インテル® Quartus® Primeプロ・エディション Software
3.2.1. Command-Line Executable Equivalents x
3.2.1.1. synth_design 3.2.1.2. place_design/route_design 3.2.1.3. report_timing 3.2.1.4. write_bitstream 3.2.1.5. write_sdf/write_verilog/write_vhdl 3.2.1.6. report_power 3.2.1.7. write_checkpoint 3.2.1.8. Run Complete Design Flow
3.3. FPGA Design Flow Using Tools with GUIs x
3.3.1. Project Creation 3.3.2. Design Entry 3.3.3. IP Status 3.3.4. Design Constraints 3.3.5. Synthesis 3.3.6. Design Implementation 3.3.7. Finalize Pinout 3.3.8. Viewing and Editing Design Placement 3.3.9. Static Timing Analysis 3.3.10. Generation of Device Programming Files 3.3.11. Power Analysis 3.3.12. Simulation 3.3.13. Hardware Verification 3.3.14. View Netlist 3.3.15. Design Optimization 3.3.16. Techniques to Improve Productivity 3.3.17. Cross-Probing in the インテル® Quartus® Primeプロ・エディション Software
3.3.2. Design Entry x
3.3.2.1. HDL Editor 3.3.2.2. Schematic/Block Editor 3.3.2.3. State Machine Editor 3.3.2.4. IP Catalog and Parameter Editor 3.3.2.5. プラットフォーム・デザイナー System Integration Tool 3.3.2.6. Platform Designer Component Editor
3.3.4. Design Constraints x
3.3.4.1. Assignment Editor 3.3.4.2. Create Timing Constraints with the タイミング・アナライザー GUI 3.3.4.3. Create Timing Constraints with the タイミング・アナライザー Text Editor
3.3.7. Finalize Pinout x
3.3.7.1. Pin Planner 3.3.7.2. インターフェイス・プランナー
3.3.12. Simulation x
3.3.12.1. Simulation Models for Designs Containing LPMs or IP Cores
3.3.13. Hardware Verification x
3.3.13.1. System Console 3.3.13.2. Signal Tap Logic Analyzer 3.3.13.3. In-System Sources and Probes 3.3.13.4. Transceiver Toolkit 3.3.13.5. EMIF Debug Toolkit 3.3.13.6. リモートデバッグ 3.3.13.7. その他の Intel® FPGAデバッグツール
3.3.14. View Netlist x
3.3.14.1. RTL Viewer 3.3.14.2. Technology Map Viewer
3.3.15. Design Optimization x
3.3.15.1. Hyper-Aware Design Flow 3.3.15.2. Physical Synthesis Optimization
3.3.16. Techniques to Improve Productivity x
3.3.16.1. Rapid Recompile 3.3.16.2. Block-Based Design Flow 3.3.16.3. Design Space Explorer II
3.4. Additional インテル® Quartus® Primeプロ・エディション Features x
3.4.1. Scripting with Tcl in the インテル® Quartus® Primeプロ・エディション Software
3.4.1. Scripting with Tcl in the インテル® Quartus® Primeプロ・エディション Software x
3.4.1.1. Running Scripts from the DOS or UNIX Prompt 3.4.1.2. Running Scripts in Batch Mode from a Shell 3.4.1.3. Running Tcl Commands Directly from the Command Line 3.4.1.4. Running Tcl Commands Interactively from the Shell 3.4.1.5. The インテル® Quartus® Prime Tcl Console Window
4. Xilinx* to Intel® FPGA Design Conversion x
4.1. Replacing Xilinx* Primitives 4.2. Converting IP Cores 4.3. Setting Equivalent Xilinx* Design Constraints 4.4. Setting Up the Simulation Environment
4.1. Replacing Xilinx* Primitives x
4.1.1. Converting I/O Buffers 4.1.2. Changing Default I/O Standard for Pins
4.1.1. Converting I/O Buffers x
4.1.1.1. Example of Converting I/O Buffer
4.2. Converting IP Cores x
4.2.1. Converting Memory Blocks 4.2.2. Converting Mixed-Mode Clock Manager (MMCM) to Phase-Locked Loop (PLL) 4.2.3. Converting Multipliers
4.2.1. Converting Memory Blocks x
4.2.1.1. Embedded Memory Blocks 4.2.1.2. Differences Between Xilinx* Memory and Intel® FPGA Memory 4.2.1.3. Determining Memory Block and Mapping Ports 4.2.1.4. Memory Port Mapping 4.2.1.5. Example: Converting Simple Dual-Port RAM
4.2.1.2. Differences Between Xilinx* Memory and Intel® FPGA Memory x
4.2.1.2.1. Memory Mode 4.2.1.2.2. Clocking Mode 4.2.1.2.3. Write and Read Operation Triggering 4.2.1.2.4. Read-During-Write Operation at the Same Address 4.2.1.2.5. Error Correction Code (ECC) 4.2.1.2.6. Byte Enable 4.2.1.2.7. Address Clock Enable 4.2.1.2.8. Parity Bit Support 4.2.1.2.9. Memory Initialization 4.2.1.2.10. Output Synchronous Set/Reset
4.2.2. Converting Mixed-Mode Clock Manager (MMCM) to Phase-Locked Loop (PLL) x
4.2.2.1. Feature Comparison 4.2.2.2. Port Mapping Reference 4.2.2.3. Example: Converting Xilinx* MMCM into an Intel® PLL
4.2.3. Converting Multipliers x
4.2.3.1. Feature Comparison 4.2.3.2. Port Mapping 4.2.3.3. Example: Converting to the LPM_MULT IP Core 4.2.3.4. Example: Converting to the Intel® FPGA Multiply Adder IP core
4.3. Setting Equivalent Xilinx* Design Constraints x
4.3.1. Device Constraints 4.3.2. Placement Constraints 4.3.3. Timing Constraints 4.3.4. Retimer Constraints
4.3.1. Device Constraints x
4.3.1.1. DRIVE 4.3.1.2. SLEW 4.3.1.3. IOB 4.3.1.4. IOSTANDARD 4.3.1.5. KEEP
4.3.2. Placement Constraints x
4.3.2.1. PBLOCK 4.3.2.2. PACKAGE_PIN 4.3.2.3. LOC & BEL 4.3.2.4. PROHIBIT
4.3.2.1. PBLOCK x
4.3.2.1.1. Differences Between PBLOCK and Logic Lock Regions
4.3.3. Timing Constraints x
4.3.3.1. set_clock_groups
4.4. Setting Up the Simulation Environment x
4.4.1. Simulation Levels 4.4.2. HDL Support for EDA Simulators 4.4.3. Value Change Dump (VCD) Support 4.4.4. Simulating Intel FPGA IP Cores
1. Introduction to Intel® FPGA Design Flow for Xilinx* Users
2. Technology Comparison
3. FPGA Tools Comparison
4. Xilinx* to Intel® FPGA Design Conversion
5. Conclusion
6. Document Revision History for Intel® FPGA Design Flow for Xilinx* Users

3.3. FPGA Design Flow Using Tools with GUIs

The インテル® Quartus® Primeプロ・エディション and the Vivado* software GUIs address the major FPGA design steps in different ways.

表 8.  GUI Feature Equivalents
GUI Feature Xilinx* Vivado* Software インテル® Quartus® Primeプロ・エディション Software
Project Creation New Project New Project Wizard
Design Entry HDL Editor HDL Editor
EDA Netlist EDA Netlist
- Schematic/Block Editor
- State Machine Editor
IP Catalog IP Catalog and Parameter Editor
IP Integrator プラットフォーム・デザイナー System Integration Tool
IP Packager プラットフォーム・デザイナー Component Editor
IP Status Report IP Status Upgrade IP Components
Design Constraints Device, Physical and Timing Constraints window

Assignment Editor,

タイミング・アナライザー Text Editor

Synthesis Synthesis Analysis and Synthesis
Third-Party EDA Synthesis Third-Party EDA Synthesis
Design Implementation Implementation Fitter (Plan, Early Place, Place, Route, Retime0 and Finalize)
Finalize Pinout

Byte Planner for memory banks

Device Window and Package Window in I/O Planning View Layout

インターフェイス・プランナー

Pin Planner
Viewing and Editing Design Placement

Device Window (in I/O Planner View Layout)

Package Window (in I/O Planner View Layout)

 Chip Planner
Static Timing Analysis Report Timing タイミング・アナライザー
Generation of Device Programming Files Hardware Manager Assembler
Power Analysis

Xilinx* Power Estimator (XPE)

Report Power

Early Power Estimation (EPE)

Power Analyzer
Simulation Vivado* Simulator ModelSim* - インテル® FPGA スタンダード・エディション
Third-Party Simulation Tools Third-Party Simulation Tools
Hardware verification Hardware Manager System Console
Integrated Logic Analyzer (ILA) and System ILA IP Signal Tap Logic Analyzer
Xilinx* Virtual Input Output (VIO) In-System Sources and Probes
JTAG-to-AXI Master System Console
IBERT IP and Serial I/O Analyzer Tool Transceiver Toolkit
Memory Calibration Debug Tool

EMIF Debug Toolkit

EMIF Debug GUI
Remote Debug using Xilinx* Virtual Cable (XVC) Remote Debug using existing TCP/IP connection
-

Signal Probe 14

In-System Memory Content Editor

Logic Analyzer Interface (LAI)
View Netlist

Schematic Window (Elaborated)

Schematic Window (Synthesized)

Schematic Window (Implemented)

RTL Viewer (Post Synthesis)

Technology Map Viewer (Post-Mapping)

Technology Map Viewer (Post-Fitting)

Fast Forward Viewer (Post-Fitting)
Design Optimization - Hyper-Aware Design Flow15
Physical Optimization Physical Synthesis Optimization
Techniques to improve productivity Incremental Compile Rapid Recompile16
Hierarchical Design Block-Based Design Flows
- Design Space Explorer II (DSE)
Partial Reconfiguration Yes Yes
Output Products Design Checkpoints Export Design Partitions
Add-On Development Tools Vivado* High-Level Synthesis High-Level Synthesis Compiler
13 Available only for インテル® Arria® 10 devices.
14 Signal Probe available only for インテル® Arria® 10 devices.
15 Hyper-Aware Design Flow available only for インテル® Stratix® 10 devices.
16 Rapid Recompile available only for インテル® Arria® 10 devices.
レベル 2 の表題