インテルのみ表示可能 — GUID: cym1514931259124
Ixiasoft
3.3.1. Project Creation
3.3.2. Design Entry
3.3.3. IP Status
3.3.4. Design Constraints
3.3.5. Synthesis
3.3.6. Design Implementation
3.3.7. Finalize Pinout
3.3.8. Viewing and Editing Design Placement
3.3.9. Static Timing Analysis
3.3.10. Generation of Device Programming Files
3.3.11. Power Analysis
3.3.12. Simulation
3.3.13. Hardware Verification
3.3.14. View Netlist
3.3.15. Design Optimization
3.3.16. Techniques to Improve Productivity
3.3.17. Cross-Probing in the インテル® Quartus® Primeプロ・エディション Software
4.2.1.2.1. Memory Mode
4.2.1.2.2. Clocking Mode
4.2.1.2.3. Write and Read Operation Triggering
4.2.1.2.4. Read-During-Write Operation at the Same Address
4.2.1.2.5. Error Correction Code (ECC)
4.2.1.2.6. Byte Enable
4.2.1.2.7. Address Clock Enable
4.2.1.2.8. Parity Bit Support
4.2.1.2.9. Memory Initialization
4.2.1.2.10. Output Synchronous Set/Reset
インテルのみ表示可能 — GUID: cym1514931259124
Ixiasoft
4.2.1.2.7. Address Clock Enable
Intel® FPGA memory supports the address clock enable feature. The address clock enable holds the previous address value for as long as addressstall is enabled. Xilinx* RAM blocks support an equivalent feature, called Address Enable.
For more information about the address clock enable feature, refer to the Embedded Memory Blocks chapter in your target device handbook.