DMAC-RMII bridge to APB, AHB, AXI bus, our innovative solution is a hardware implementation of media access control protocol defined by the IEEE standard. The DMAC-RMII, in cooperation with an external PHY device, enables network functionality in design. It is able to transmit and receive Ethernet frames to and from the network. Half and full duplex modes are supported, as well as 10 and 100 Mbit/s speed. The Core can work with a wide range of processors: 8, 16 and 32-bit data bus, either little or big endian byte order format. The DMAC-RMII provides a static configuration of PHY IC. Please remember that our design is technology independent and thus can be implemented in a variety of process technologies. This Core strictly conforms to the IEEE 802.3 standard.
Digital Core Design is a leading Intellectual Property (IP) Core provider and System-on-Chip (SoC) design house. The company was founded in 1999 and thanks to in-depth specialization and innovative approach we have introduced more than 70 different architectures. Among them you can find e.g. World’s Fastest 8051 CPU, World’s Smallest 8051 CPU, silicon proven and royalty-free 32-bit CPU, Automotive LIN, CAN, CAN-FD, CAN-XL controllers