• <Intel.co.jp のその他の情報

Intel® E7210 MCH Datasheet

申し訳ありませんが、この PDF はダウンロード形式でのみご提供しています。

Intel® E7210 MCH Datasheet

The Intel® E7210 chipset is designed for systems based on the Intel® Pentium® 4 processor with 512-KB L2 cache on 0.13 micron process in the 478-pin package or the processor code named Prescott and supports front-side bus (FSB) frequencies of 400 MHz, 533 MHz, and 800 MHz. The Intel E7210 chipset contains two main components: Memory Controller Hub (MCH) for the host bridge and I/O Controller Hub for the I/O subsystem. The Intel E7210 chipset uses the Intel® 6300ESB I/O Controller Hub (ICH) for the I/O Controller Hub. This document is the datasheet for the Intel E7210 MCH component. The Intel E7210 chipset platform supports the following processors:

• Pentium 4 processor with 512-KB L2 cache on 0.13 micron process in the 478-pin package.
• Processor code named Prescott. The processor code named Prescott returns a processor signature of 00000F3xh when the CPUID instruction is executed with EAX=1. Note: Unless otherwise specified, the term ICH in this document refers to the Intel 6300ESB I/O Controller Hub. Note: Unless otherwise specified, the term processor in this document refers to the Pentium 4 processor with 512-KB L2 cache on 0.13 micron process in the 478-pin package and processor code named Prescott.

Figure 1 shows an example block diagram of an Intel E7210 chipset-based platform. The Intel E7210 chipset is designed for use in a desktop system based on the Pentium 4 processor with 512-KB L2 cache on 0.13 micron process in a 478-pin package and the processor code named Prescott. The processor interface supports the Pentium 4 processor subset of the Extended Mode of the Scalable Bus Protocol. In an Intel E7210 chipset-based platform, the MCH provides the processor interface, system memory interface, CSA interface and hub interface. The MCH provides a Communications Streaming Architecture (CSA) Interface that connects the MCH to a Gigabit Ethernet (GbE) controller. The Intel E7210 chipset platform support 4 GB of system memory. The memory can be 266/333/400 MHz Double Data Rate (DDR) memory components with a 64-bit wide data bus. Available bandwidth is 6.4 GB/s using DDR400 in dual-channel mode.

Read the full Intel® E7210 MCH Datasheet.